Ground Coverage
Ground coverage is the part of a plot occupied by the building at ground level, measured to the outer surface of its walls, columns or slab. Building rules cap it so that open space is left around the structure.
Clause 1.4.57 of Delhi's Unified Building Bye Laws 2016 defines ground coverage as the portion of the building within the maximum outer surface of the structural wall, column or slab, measured at ground level. It is usually expressed as a share of the plot area.
Ground coverage and FAR
The two work together. Floor area ratio caps the total built area across all floors; ground coverage caps the footprint. Modest coverage with generous FAR produces a taller, slimmer building, while high coverage with low FAR gives a low, spread-out one. Height limits and setbacks then shape the result.
Related bye-law terms
- Covered area (clause 1.4.27): ground area covered immediately above plinth level, excluding spaces listed in clause 7.17.
- Plinth (clause 1.4.87): the portion of a structure between the surface of the surrounding ground and the floor immediately above it.
- Stilt (clause 1.4.111): a non-habitable portion above ground, on columns, open on at least two sides, used for parking and landscaping.
Why a buyer should care
In builder floors and independent houses, rooms added into courtyards or side spaces can push a building past its permitted coverage. Ask for the sanctioned plan and compare the footprint on paper with the one on site before you pay an advance. Keep this check in mind when you browse builder floors in Delhi.
- Unified Building Bye Laws for Delhi 2016 (DDA compendium, amendments up to 12 February 2020), clauses 1.4.27, 1.4.57, 1.4.87, 1.4.111 Delhi Development Authority ↗